UniFi Protect Camera Says "Managed by Other" After a Console Swap: Your Options
Say your office swapped its UniFi console last week. Monday morning you open Protect and every camera says "Managed by Other." The wall of live video is gone. The next question matters more: is the old footage gone too?
On a UniFi Protect camera, "Managed by Other" means it still belongs to your old console setup, so it won't accept the new one. Ubiquiti lists three ways back: restore a console backup made while the cameras were already managed, reset each camera and adopt it again, or reassign it from the UniFi Network mobile app (account owner only). Which one works depends on what backups exist. Until you know, leave the old console and drives alone. Old recordings don't move to a new console, and reformatting drives erases them.
Key Takeaways
- 1Don't reset anything until you know whether you need the old recordings.
- 2Find out now whether a backup exists and whose Ubiquiti account holds it.
- 3Old recordings stay on the old console's storage. The new console starts fresh.
- 4Photograph what a camera's screen says before anyone changes anything.
- 5If the old console still runs, export footage you may need first.
Why every camera says "Managed by Other"
A UniFi camera remembers which console adopted it. Adopting is how a console takes charge of a camera. When you replace or factory reset that console, the new one is a stranger. The camera still considers itself managed by the old one, so it ignores the new one.
Ubiquiti says the message appears whenever a camera was managed by another UniFi application instance. That includes your own console after a factory restore. In other words, the cameras are usually not broken. They're attached to a console that no longer holds their settings.
What happens to the old footage
Ubiquiti says existing recordings can't be transferred between UniFi consoles. They stay on the original console's storage until someone removes or reformats it. If you want to reuse those drives in the new console, Ubiquiti says they have to be reformatted, which removes the recordings.
So the old drives may hold the only copy of anything recorded before the swap. If an incident, an insurance claim or a dispute touches that period, that footage matters more than getting the cameras back this week. Our guide to requesting footage for police or insurance covers what to gather.
What you can safely check yourself
Everything here is look only.
- Read one camera. Open it in Protect, write down exactly what the screen says, and take a photo.
- Find the old console and its drives. Note where they are and whether they're powered. Don't move, wipe or reformat them.
- Ask about backups. Ubiquiti says that when automatic backups are on, a cloud backup is made each week and before each major update. Only the Cloud Gateway Owner can manage them, because they're saved to that person's Ubiquiti account. Ask that person to check, with their own login, whether any are listed. Nobody needs to share a password.
- Write down the dates you might need. An incident, a claim, a dispute. That tells whoever fixes this how careful to be.
- Stop there. Resetting and adopting again aren't DIY jobs on a system that matters.
How to fix "Managed by Other": your three ways back
Ubiquiti's official fixes for "Managed by Other" are below. A tech picks one after looking at your setup.
- Restore the console from a backup
- Fits when: A backup exists from when the cameras were already managed
- Watch out for: A backup made after the swap won't help
- Reset the camera, then adopt it again
- Fits when: There's no usable backup
- Watch out for: The reset returns the camera to factory defaults, so its settings are gone
- Reassign it with the UniFi Network mobile app
- Fits when: The account owner signed in to that app while the camera was managed
- Watch out for: Account owner only
If a restore moves you to a new console and the cameras show as "adopted but offline" on the old one, that's expected. Ubiquiti says it lets you open old recordings there while the cameras record new footage on the new console.
What a tech checks first
An experienced tech doesn't start with the cameras. They start with two questions.
First, does a backup exist, and was it made while these cameras were still managed? That decides between a restore and a reset. A restore brings the cameras back with their settings. A reset starts each one over.
Second, are the old drives intact? They decide whether footage from before the swap still exists.
Only then do they look at software versions on the console and the cameras, and whether the cameras can reach the new console on the network. A camera that can't reach the console looks a lot like one that refuses it, and resetting won't fix a network path.
Cameras still say "Managed by Other"?
Call us if there's no usable backup, if footage from before the swap matters, or if you'd rather not reset cameras yourself. If you're a PAX customer, we'll talk through what to protect first and how to bring the cameras back under your console. If you're not, call anyway and we'll talk through your options. See our system takeover and security camera services for NYC businesses. If you inherited the system from an installer who's gone, see our guide to the first two weeks after an installer goes out of business.
Call (855) 440-5353 or email info@paxsecurity.com.
Sources
- Ubiquiti, How to Reset UniFi Devices to Factory Defaults (date not shown): https://help.ui.com/hc/en-us/articles/205143490-How-to-Reset-UniFi-Devices-to-Factory-Defaults
- Ubiquiti, Backups and Migration in UniFi (date not shown): https://help.ui.com/hc/en-us/articles/360008976393-Backups-and-Migration-in-UniFi
- Both pages read in full 2026-11-15. Vendor pages change, so check the current page before you follow a step.
Common Mistakes to Avoid
Restoring the wrong backup. A backup made after the swap won't have the cameras as managed, so it can't bring them back. Check the date first.
Leaving the only backup in a former employee's account. Cloud backups are managed by one owner. If that person left, start with our guide to what to do with no admin login.
Buying new cameras. "Managed by Other" is a status, not damage. Check for a backup before spending money on hardware.
Forgetting the footage is now split. If you keep the old console, footage from before the swap is there and newer footage is on the new console, so a request that spans the swap needs both.
Frequently Asked Questions
How do I fix "Managed by Other" on a UniFi Protect camera?
Ubiquiti lists three fixes, set out in the table above. A tech usually starts with the backup restore, because Ubiquiti calls a factory reset "generally undesirable" when moving devices between consoles. A reset also clears each camera's settings.
Does "Managed by Other" mean someone else has taken over my cameras?
Not necessarily. Ubiquiti says it appears when a camera was managed by another UniFi application instance, and that includes your own console after a factory restore. If nobody on your team swapped or reset a console, ask whoever manages your network whether someone else did.
Who can see our backups?
Ubiquiti says only the Cloud Gateway Owner can manage cloud backups. They're listed at account.ui.com/backups. A local backup file can also be downloaded from the console's backup settings, so ask whether anyone saved one.
Can I reuse the old cameras and drives with a new console?
The cameras, yes, once they're managed by the new console. The drives can be reused too, but only after they're reformatted, which erases the old recordings. Our guide to reusing cameras when you switch providers covers the wider question.
Related Articles
Not sure what your property needs?
PAX Security designs and installs security cameras, access control, intercom, and cabling systems for commercial and multifamily properties across New York City. Tell us about your building and we will give you a straight answer.